Technical reliability reporting for the Solpex 16-pack identifies a significant failure vector involving thermal degradation and seal integrity. Audit data indicates that the Ni-MH 600mAh cells exhibit high internal resistance after approximately 100 thermal cycles, which reduces operational runtimes during winter periods. Material analysis confirms the use of an ABS plastic housing that lacks UV-stabilizers, potentially leading to material embrittlement and yellowing in high-exposure regions.
The light source consists of integrated SMD LEDs with a fixed 3000K warm white output. Technical specifications list the solar component as a 0.2W polycrystalline silicon panel with a conversion efficiency of 15-17%. Ingress protection is compromised at the push-switch rubber boot, which often lacks a secondary gasket to prevent moisture-induced electrolytic corrosion on the internal PCB.
Performance metrics indicate a runtime of 4-6 hours following low-solar-yield days. While the two-screw vertical installation provides a stable mounting interface, the luminous flux is categorized as decorative rather than safety-critical. Performance parity is noted across several badge-engineered variants sharing this standardized 1.2V DC driver architecture.
- Array Size: 16 individual units
- Battery Chemistry: 1.2V Ni-MH
- Solar Architecture: 0.2W Polycrystalline
To mitigate the risk of mid-night power failure due to low battery capacity, the Peasur 140 LED Motion Lights offer a higher-capacity lithium-ion buffer for more demanding illumination requirements.
This hardware is a standard entry in the smart deck and patio lighting classification.
