Technical specifications for the BTF-Lighting WS2812B strip include 60 LEDs per meter, utilizing an integrated control IC embedded within each 5050 RGB package. Material analysis confirms a dual-layer copper substrate for improved thermal management and signal integrity. The 5V DC architecture allows for granular, independent addressability of every LED but requires power injection for extended runs to mitigate voltage drop.
Operational data indicates a peak power draw of 3.6A for the 1-meter strip at maximum white brightness, exceeding the current limits of standard USB 2.0/3.0 ports. The hardware utilizes a 3-pin JST-SM connector for data and power. As an IP30-rated device, it lacks moisture protection and must be mounted on non-conductive surfaces to prevent electrical shorts across exposed copper pads.
- Chipset: WS2812B (Addressable RGB).
- Density: 60 LEDs/meter on 5V DC.
- Interface: 3-pin JST-SM connector.
- Rating: IP30 (Non-waterproof).
Pair this hardware with a pre-flashed ESP32 smart lighting controller to ensure stable power delivery and local Wi-Fi control.
The WS2812B LED Strip is an alternative for DIY projects requiring custom chasing effects that standard analog RGB strips cannot produce.
