Technical specifications for the Veken 63-inch desk list a single-motor lift system and a dual-stage telescopic steel frame. The desktop is a 63x30 inch spliced configuration using reinforced dowel pins for seam stability. The motor is rated for a 176 lbs static load, and the 4-preset memory controller exhibits low standby power consumption of less than 0.5W. While the unit lacks native Zigbee support, its power-cycle behavior allows for external automation.
The frame is constructed with 15mm thick desktop material. Performance highlights include:
- High-torque motor with soft-start and soft-stop functionality.
- Low standby power consumption for energy efficiency.
- Reinforced spliced-top architecture.
To avoid "E01" or "E02" synchronization errors, calibration must be performed with zero cable tension. The motor's Hall-effect sensors can be reset by holding the "Down" button for 10 seconds. The anti-collision sensitivity is a fixed factory setting and cannot be adjusted by the user.
To stabilize the 15mm surface when using high-torque monitor clamps, reinforced monitor arms with wide-base pressure plates should be integrated. This hardware is classified within the electric standing desks category for high-surface-area applications.
