This mechanical component is a fixed-offset housing constructed from UV-stabilized polycarbonate. It is designed to provide a 5-degree to 15-degree horizontal or vertical angle correction for the Blink Video Doorbell. The polymer selection is engineered to resist chalking and brittleness under high solar exposure. Standardized testing confirms that the mounting geometry maintains the IP-rated seal of the primary doorbell unit when installed with the provided foam gasket.
The "Click-Lock" geometry is specific to official Blink hardware, ensuring that internal back-pin connectors for wired chimes remain aligned. Over-torqueing the mounting screws can lead to chassis warping, which may interfere with the weather seal or the secure seating of the camera unit.
- Angular Correction: 5 to 15 degrees (stackable or reversible).
- Material: UV-stabilized polycarbonate.
- System Support: Retains compatibility with wired chime terminals.
While the fixed wedge maintains a minimalist profile, it offers less articulation than adjustable ball-joint mounts. The material density is optimized for long-term outdoor exposure without significant structural degradation.
If the 15-degree limit of this wedge is insufficient for your entry path, the Dukoyb Adjustable Mount provides up to 150 degrees of lateral movement for total porch coverage.
This unit is a critical alignment accessory for wireless video doorbell systems, ensuring the lens is positioned for optimal motion detection.
